Owner's Manual

sigsauer.com

H i I

4. At this point you have selected AMR and Target Mode. You will now set the display brightness. AUTO

is default and will be flashing. You can switch between 9 fixed settings (LOW 1 – 3, MED 1 – 3, HI 1 – 3 or

AUTO) by pressing and releasing the RANGE button to index through the brightness selection. Confirm

and save your selection by pressing and releasing the MODE button to index to the next programming

mode. If you do not press and release the MODE button the rangefinder will save your displayed setting

and turn off. AUTO Display Brightness is recommended.

5. At this point you have selected AMR and set Target Mode and Display Brightness. You will now select

an aiming reticle. Circle only is default and will be flashing. You can choose between three reticles by

pressing and releasing the RANGE button to index through the reticles. Confirm and save your selection

by pressing and releasing the MODE button to index to the next programming mode. If you do not press

and release the MODE button the rangefinder will save your displayed setting and turn off.

AUtO

30 30