Owner's Manual

sigsauer.com

2. Press and hold the MODE button down for at least 2 seconds to enter

programming mode. LOS or AMR will begin flashing (AMR is default).

Release the MODE button. You can toggle between LOS and AMR by

pressing and releasing the RANGE button. Your selection will be flashing

LOS or AMR. Confirm and save your selection by pressing and releasing

the MODE button to index to the next programming mode. If you do

not press and release the MODE button the rangefinder will save your

displayed setting (LOS or AMR) and turn off. LOS mode allows you to

leverage the onboard ballistic calculator or simply return the line of

sight range and angle of incline. AMR mode provides angle modified

range or equivalent horizontal range and is best used with Sig Ballistic

Turrets or for archery.

3. If you selected AMR and pressed and released the MODE button, then the rangefinder will index

to Target Mode. BEST or LAST will be flashing. You can toggle between BEST or LAST by pressing and

releasing the RANGE button. Confirm and save your selection by pressing and releasing the MODE

button to index to the next programming mode. If you do not press and release the MODE button the

rangefinder will save your displayed setting (BEST or LAST) and turn off. BEST Target Mode should be

used in most situations, however, when hunting through foliage or in high grass the LAST Target Mode is

recommended.

2. Press and release

RANGE to make

selection

1. Press and hold down MODE

2 seconds

3. Press and release MODE to

index to next setting

MODE

BEST