Owner's Manual

38
39
sigsauer.com
CONFIGURING GLOBAL SETTINGS IN THE BDX APP
From the Home Screen of the BDX App you can configure Global Settings. Any field that is in
white can be changed by touching on the unit of measure and toggling between values. The help
menu is available to assist you. Global Settings include:
1. Range Unit (Y, M)
2. Wind Speed Unit (mph, m/s, kph)
3. Muzzle Velocity Unit (fps, m/s)
4. Bullet Diameter Unit (inches, cm)
5. Bullet Weight Unit (grains, grams)
6. Temperature Units (F / C)
7. Altitude Units (feet, meters)
8. Sight Units (MOA, MILS)
9. Clear Saved Device List
MUZZLE VELOCITY (MV) CALIBRATION (continued)
Now enter the elevation offset between point of impact and point of aim and select CONFIRM.
In this example the 3 shot group was 7 inches low. A new MV of 2477 fps was calculated.
Select YES to confirm and this MV will now be used for ballistic solutions going forward. See the
confirmation dialogue box in the image below right.