Owner's Manual
26
27
sigsauer.com
save your setting and index to the next setting for configuration. If you do not press and release
the MODE button the rangefinder will save your selection and turn off. The programming sequence
for selecting a custom ballistic profile or ballistic group is grP1 > grP2 > grP3 > grP4 > grP5 > grP6
> grP7 > grP8 > APP > grP1. If you have previously configured a custom ballistic profile then APP
should be flashing. Your KILO must be in ABU mode when using a custom bullet profile or any of the
8 embedded groups in order to display your holdover solution.
7. QuickBOND
The last selection is QuickBOND - bond will be flashing. You can turn ON or OFF QuickBOND
by pressing and releasing the RANGE button. Confirm your selection by pressing and releasing
the MODE button which will save your setting and return to ready to range. If you do not press
and release the MODE button the rangefinder will save your selection and turn off. By toggling
QuickBOND to the ON position, your KILO will automatically search for and bond to a nearby SIERRA
riflescope set to illumination setting 1.
DIGITAL BALLISTICS XCHANGE – DOWNLOADING AND CONFIGURING THE FREE BDX APP
In this section you will download the BDX App, pair the App with your KILO and create a custom
bullet profile.
1. Turn Bluetooth on
Check in Settings on your Android or iOS device to make sure that Bluetooth is on. If Bluetooth is
off, switch it on.