Owner's Manual

RANGEFINDER CONFIGURATION – PROGRAMMING SEQUENCE

Note – the rangefinder can more easily be programmed and configured by using the

free Sig BDX App.

1. Mode Selection (AMR, LOS, ABU or ABE/ABX)

To enter programming mode, press and release the RANGE button to wakeup the rangefinder. Once

the display is visible, press and hold the MODE button for 2 seconds – then release the MODE button

and the current selection will be flashing (AMR is the default setting). You can switch between

AMR, LOS, ABU or ABE/ABX by pressing and releasing the RANGE button. Confirm your selection by

pressing and releasing the MODE button which will save your setting and index to the next setting

for configuration. If you do not press and release the MODE button the rangefinder will save your

selection and turn off. If the user intends to use a calculated ballistic solution, the rangefinder must

be in ABU or ABE/ABX mode. Instructions for downloading and configuring the BDX App on your

smartphone will be detailed later in the instructions.