Owner's Manual

24
DISPLAY INFORMATION
The display shows you the center aiming circle, the unit of
measure (Y), Angle Modified Range mode (AMR) and the remaining
battery status. The display will remain active for up to 30 seconds
or whatever timeout has been set within in the SIG BDX App. You
can then press the RANGE button to determine range to target.
If you press the RANGE button while the rangefinder is off and continue to
hold the RANGE button down, the rangefinder will automatically
switch into SCAN mode within 1 second.
After determining the distance to the target, the rangefinder will
continue to display the center aiming circle and range data for 30
seconds – and only the range data. All other information is not shown
after initial wakeup to prevent clutter in the field of view.
Display at initial wakeup
Display when ranging