Owner's Manual

sigsauer.com

KILO SETTINGS

From the Settings menu you can fully configure the following:

1. Mode of Operation (LOS, AMR, ABU or ABE/ABX)

2. Target Mode (BEST or LAST)

3. Unit of Measure (Yards or Meters)

4. Sleep Timeout (30, 60, 120 or 180 seconds)

5. Holdover / Sight unit of Measure (MOA or MILS)

You can toggle all fields by simply touching the letters in white. Your KILO

must be turned on and paired. To save your settings touch the BDX icon in

the upper left corner of the display. This will save your settings. You can

also access the help menu by clicking on the “?” icon in the upper right of

the screen.

Note – The KILO will not range when the Settings menu is open and active.

Note – The rangefinder must be in ABU mode to calculate Real time ballistic

solutions and send them to the SIG BDX Riflescope with Bluetooth.

TEMPERATURE AND ALTITUDE

Once your KILO is paired and actively synced with your smartphone, when you enter the

RANGEFINDER HUD screen your smartphone will automatically pull the local temperature and

altitude from the closest weather station. If you are not in cell range you can manually update both

temperature and altitude by touching on the white numbers in each field and manually updating

these environmental conditions.