Owner's Manual

sigsauer.com

4. Unit of Measure Selection (Y or M)

Your current selection will be flashing (Yards is default). You can toggle between Y or M by pressing

and releasing the RANGE button. Confirm your selection by pressing and releasing the MODE button

which will save your setting and index to the next setting for configuration. If you do not press and

release the MODE button the rangefinder will save your selection and turn off.

5. Ballistic Group Selection

Your current selection will be flashing (grP1 is default). You can toggle between a custom ballistic

profile (APP) configured using the BDX App or one of the 8 ballistic groups by pressing and releasing

the RANGE button. Confirm your selection by pressing and releasing the MODE button which will

save your setting and index to the next setting for configuration. If you do not press and release

the MODE button the rangefinder will save your selection and turn off. The programming sequence

for selecting a custom ballistic profile or ballistic group is grP1 > grP2 > grP3 > grP4 > grP5 > grP6

> grP7 > grP8 > APP > grP1. If you have previously configured a custom ballistic profile then APP

should be flashing. Your KILO must be in ABU mode when using a custom bullet profile or any of the

8 embedded groups in order to display your holdover solution.

6. QuickBOND

The last selection is QuickBOND - bond will be flashing. You can turn ON or OFF QuickBOND

by pressing and releasing the RANGE button. Confirm your selection by pressing and releasing

the MODE button which will save your setting and return to ready to range. If you do not press

and release the MODE button the rangefinder will save your selection and turn off. By toggling

QuickBOND to the ON position, your KILO will automatically search for and bond to a nearby SIERRA

riflescope set to illumination setting 1.