2.0 KILO ® KILO10K-ABS™ 10x42 mm RANGEFINDING BINOCULAR WITH BALLISTIC DATA XCHANGE™ OWNERS MANUAL 2.
sigsauer.com TABLE OF CONTENTS Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Key Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Product Identification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Operation . . . . . . . . . . . . . . . . . . . . . . . .
sigsauer.
sigsauer.com PRODUCT IDENTIFICATION: LIGHTWAVETM DSP TECHNOLOGY A - Power / Range Button B - Eyecup / Diopter Focus Adjustment C - Mode Button D - Harness Attachment Point E - Battery Compartment SIG SAUER’s proprietary Lightwave DSP engine leverages HyperScan – an advanced power management technique that provides the fastest refresh rate in scan mode (4 times per second) even at distances up to a mile.
sigsauer.com SIG SAUER BALLISTIC DATA XCHANGE 2.0 (BDX 2.0) SIG SAUER’s Patent Pending BDX system takes the guesswork out of determining the proper range and ballistics solution for hitting your target with the first round. Low Energy Bluetooth combined with an embedded ballistic calculator (Applied Ballistics Ultralight) allows the user to configure up to 25, custom bullet profiles on the free BDX App and sync to your KILO.
sigsauer.com GENERAL OPERATION Your rangefinder provides 5 modes of operation: AMR, LOS, ABU, ABE/ABX and Ballistic Group Selection. When ABU is selected the user can pair the KILO with a nearby smartphone where the BDX App should already be installed. The user configures a bullet profile in the app, which is actively synced with a paired rangefinder. For example, the user downloads and installs the BDX App, selects a 0.
sigsauer.com MODES OF OPERATION - ANGLE MODIFIED RANGE (AMR) AND LINE OF SIGHT (LOS) ANGLE MODIFIED RANGE Angle modified range is the equivalent horizontal range to the target and is comparable to the “horizontal leg” of a triangle. AMR is also known as “rifleman’s rule” and uses the LOS range and angle of incline to calculate the horizontal distance the projectile travels between shooter and target. AMR is very accurate for shorter distances (i.e. < 400 yards) and archery.
sigsauer.com APPLIED BALLISTICS ULTRALIGHT (ABU) Your rangefinder has an embedded ballistics solver developed by Sig Sauer, Applied Ballistics and nVisti. By pairing your KILO with the free BDX App you can enter custom ballistics information for up to 25 bullet profiles and sync one at a time to your KILO. The active ballistic profile is now saved on your KILO, and when in ABU mode, will provide an accurate ballistic solution out to 800 yards maximum.
sigsauer.com PROJECTED, SEGMENTED ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAY W WARNING A – Circle center aiming feature B – 5 Character alphanumeric displays SAFETY AND OPERATION PROCEDURES C – Range unit of measure The KILO is classified as a Class 1M product.
sigsauer.com OPERATION SET UP The KILO10K-ABS is designed to get you up and running without the typical complexity of buried menus and programming modes. The binocular comes out of box in the following configuration and can also be configured with the free BDX App: Installing the Battery (a) Angle Modified Range (equivalent horizontal range) Remove the battery cap by turning the cap in a counter-clockwise direction. Insert (1) CR2 Primary Lithium battery positive side first.
sigsauer.com After installation of the battery and depressing the RANGE button, the status of the rangefinder is displayed: 20 ATTACHING THE HARNESS Attach the harness to the binocular by taking the small connector straps and looping them through the attachment points on both sides of the binocular. Next connect the shoulder straps to the upper buckles on the binocular pouch and place over your head.
sigsauer.com DIOPTER ADJUSTMENT EYECUP ADJUSTMENT The KILO3000 features two diopter adjustments. One for the internal OLED display (right) and one for distant targets (left). Press the RANGE button to turn on the bino - the display should be visible in the right channel. Closing your left eye and adjust the diopter on the right channel to focus the display. Next, locate a distant target with your binocular using the center focus knob to bring the target image into focus using your right eye.
sigsauer.com DISPLAY INFORMATION HYPERSCAN MODE The display shows you the center aiming circle, the unit of measure (Y), Angle Modified Range mode (AMR) and the remaining battery status. The display will remain active for up to 30 seconds or whatever timeout has been set within in the SIG BDX App. You can then press the RANGE button to determine range to target.
sigsauer.com RANGEFINDER CONFIGURATION – PROGRAMMING SEQUENCE 2. Target Selection (BEST or LAST) Note – the rangefinder can more easily be programmed and configured by using the free Sig BDX App. BEST or LAST should be flashing (BEST is the default setting). You can toggle between BEST or LAST by pressing and releasing the RANGE button. Confirm your selection by pressing and releasing the MODE button which will save your setting and index to the next setting for configuration.
sigsauer.com 4. Unit of Measure Selection (Y or M) 6. QuickBOND Your current selection will be flashing (Yards is default). You can toggle between Y or M by pressing and releasing the RANGE button. Confirm your selection by pressing and releasing the MODE button which will save your setting and index to the next setting for configuration. If you do not press and release the MODE button the rangefinder will save your selection and turn off. The last selection is QuickBOND - bond will be flashing.
sigsauer.com BALLISTICS DATA XCHANGE – DOWNLOADING AND CONFIGURING THE FREE BDX APP 2. Download the BDX App from the App Store / Google Play Store In this section you will download the BDX App, pair the App with your KILO and create a custom bullet profile. Go to the App Store or the Google Play store and download the SIG SAUER BDX App. Search for the word SIG SAUER or BDX. 1. Turn Bluetooth on Check in Settings on your Android or iOS device to make sure that Bluetooth is on.
sigsauer.com 3. Launch the free SIG SAUER BDX App and Pair with your KILO (Enter your PIN code) On your smartphone, open the BDX App, click on PAIRING, turn on your KILO by pressing and releasing the RANGE button and then press “Scan for Devices” on the App. Your KILO should be listed below the KILO icon and “Select Device”. Your rangefinder ID should be listed in white letters. Touch the ID in white.
sigsauer.com 3a. Updating your KILO to the latest software during Pairing 4. Configure up to 25 custom bullet profiles You may be prompted to update the software on your KILO. These software updates are mandatory and allow Sig Sauer to ensure that your BDX App and KILO perform optimally. Most updates take less than 1 minute. Ensure that your KILO is turned on and that your smartphone has at least 25% battery life remaining before installing any software updates.
sigsauer.com After selecting a bullet manufacturer, select the actual bullet you intend to use. Once selected you will return to the Gun Profile page where you will need to click on the sync icon to the right to activate this profile. In this example the new profile is called “.223 Sierra” – be sure to activate this profile. RANGEFINDER HEADS-UP DISPLAY (HUD) From the home screen of your BDX App select RANGEFINDERS to display the HUD.
sigsauer.com KILO SETTINGS TEMPERATURE AND ALTITUDE From the Settings menu you can fully configure the following: Once your KILO is paired and actively synced with your smartphone, when you enter the RANGEFINDER HUD screen your smartphone will automatically pull the local temperature and altitude from the closest weather station.
sigsauer.com MUZZLE VELOCITY (MV) CALIBRATION MUZZLE VELOCITY (MV) CALIBRATION (continued) The most important input for calculating accurate Applied Ballistics solutions is getting your MV correct. You need to either chronograph your firearm or use the embedded MV Calibration routine built into the BDX App. To use the MV Calibration routine make sure your scope is zeroed (i.e.
sigsauer.com CONFIGURING GLOBAL SETTINGS IN THE BDX APP PAIRING A KESTREL 5700 ELITE WITH THE KILO10K-ABS From the Home Screen of the BDX App you can configure Global Settings. Any field that is in white can be changed by touching on the unit of measure and toggling between values. The help menu is available to assist you. Global Settings include: Using the RANGE / MODE buttons or the BDX App, put the KILO in ABE/ABX mode. This allows the KILO to be seen by the Kestrel. ABE will be displayed in the KILO.
sigsauer.com FREQUENTLY ASKED QUESTIONS (FAQ): Q: I can’t get the display to focus. A: You need to adjust the diopter ring to your vision. Rotate the eyecup / diopter ring in either direction until the display comes into sharp focus. Q: I can’t seem to range very far past trees or animals. A: Your KILO will perform differently based on changes in ambient conditions such as bright sunlight or snow, rain or fog, temperature and the reflectivity of the target being ranged.
sigsauer.com Q: When using AB External on my KILO I can no longer see the rangefinder information on the HUD in the BDX App. A: If your KILO and a Kestrel are actively paired (sending / receiving information) the BDX App cannot be connected and paired to your KILO at the same time. Q: My KILO is set to AB External but isn’t displaying holdover information. A: To display a complete ballistic solution your KILO must be actively paired with a Kestrel.
sigsauer.com A – 5 in / 127 mm B – 5.75 in / 146 mm C – 2.5 in / 63.5 mm KILO10K-ABS™ 10x42 mm SPECIFICATIONS B Magnification Objective Clear Aperture Close Focus Distance Eye Relief Angular (FOV) A FOV @ 1000yds Laser Divergence Range Response Time C Scanning Range Resolution Under 100 yds Max Range (Class 1M) Weight with Battery 48 10x 42 mm 20 ft 18 mm 6.1 degrees 320 ft 1.5 x .06 MRAD 0.25 seconds Yes .
sigsauer.com W DANGER CLASS 1M LASER PRODUCT. INVISIBLE LASER RADIATION. DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS (BINOCULARS OR TELESCOPES). This product complies with IEC 60825-1: 2014-05 Ed 3.0 and complies with FDA performance standards for laser products except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. FCC ID:2AP8SK10K IC:24032-K10K P p < 41.
sigsauer.com FCC STATEMENT: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
sigsauer.
FOR PRODUCT SERVICE ON THIS MODEL, PLEASE CALL 603-610-3000 27100 SW Parkway Avenue, Wilsonville, Oregon 97070 USA P/N 7403053-01 R01 sigsauer.
