Manual

Attaching the barrel to the frame:
1. Grasp the butt stock at the pistol
grip and push the top lever to the
right until it locks, with your
thumb. (See Figure 1.)
2. Grasp the barrel assembly and align
it parallel to the action with the
muzzle end pointed downward at an
approximate 45-degree angle.
3. Insert the barrel monoblock into
the frame so that the circular pivot
pin recesses engage the circular
pivot pins at the front of the frame.
(See Figure 2.)
4. When the pin recesses are snugly
engaged in the frame pivot pins,
rotate the barrels upward until the
action is completely closed and the
top lever snaps back to its closed
position. (See Figure 3.)
7
Figure 1
Figure 2
Figure 3
To Assemble