Manual

Assembly and Disassembly
Before assembly, be sure to clean all
parts of any visible debris or dirt.
After wiping the mechanism clean,
place a thin film of a quality high-
pressure gun grease on the following
surfaces (See Figures 1A, 1B, and 1C):
1A) The forearm bracket.
1B) Barrel lug, hinge pin bearing
surface and ejector slide.
1C) Hinge pin, cocking lever and
locking bolt.
6
Figure 1A
Figure 1B
Figure 1C
WARNING
Be sure to wear eye protection
prior to performing any assem-
bly or disassembly.