Manual

Manual Safety Operation
1. The safety mechanism on your
Aurora Series shotgun functions as
both a safety and barrel selector. It
is located on the action tang imme-
diately in back of the top lever.
2. To engage the safety mechanism,
place your thumb on the safety and
move it rearward towards the butt.
When it is in the correct, “safe” posi-
tion, you will see the letter “S” fully
exposed on the tang directly in front
of the top edge of the safety. (See
Figure 6.) When the letter “S” is fully exposed the safety is “ON”.
3. To take the gun off safe, place your thumb on the safety and push it forward
until it covers the letter “S”. The gun is now ready to fire.
WARNING
REMEMBER that the safety mechanism is not a substitute for safe
gun handling. Always keep the gun pointed in a safe direction even
when the safety is engaged, to avoid serious injury to you or others.
WARNING
If the safety mechanism becomes loose or difficult to operate, unload
the firearm and return it to SIGARMS
™
immediately for service.
Barrel Selector Operation
1. The barrel selector consists of a button in the middle of the safety. Pushing
the button to the right, exposing two red dots, will cause the top barrel to fire
first.
2. Pushing the button to the left, exposing one red dot, will cause the bottom
barrel to fire first.
3. The action is recoil-operated. This means that a shell must be fired from the first
selected barrel before the gun will fire a shell chambered in the second barrel.
9
Figure 6