Manual

Attaching the forend:
1. Hold the shotgun at the pistol grip,
take the forend and slide the rear,
semi-circular end into and against
the matching curved section of the
frame. (See Figure 4.)
2. Applying rearward pressure and
pressing in the forend release button,
push the forend upward against the
barrels until the forend release button
snaps outward into the locked posi-
tion. (See Figure 5.)
8
Figure 4
Figure 5
To Disassemble
1. Before disassembling, be sure that the chambers are empty and the shot-
gun is unloaded.
2. Push in the forend release button to unlock and remove the forend.
3. While pushing the top lever to the right, rotate the barrels downward until the
monoblock pivot pin recesses can slide out of the matching internal pivot pins.