Owner's Manual

02
COCKING AND LOADING
• Insert a pellet, head fi rst, into the breech end of the
barrel which is exposed when you cock the air rifl e.
Make sure that you seat the pellet fully, ensuring that
the pellet skirt is fl ush with or below the face of the
breech. Avoid causing any damage to the pellet skirt.
LOADING: Always be certain you are using the
correct size (caliber) pellet for your air rifl e. Refer to
the markings on your air rifl e to confi rm the correct
pellet size. Never reuse ammunition.
USE ONLY THE CALIBER PELLET DESIGNATED FOR YOUR AIR RIFLE.
THE CORRECT CALIBER IS CLEARLY MARKED ON SIDE OF THE
AIRGUN BREECH. DO NOT ATTEMPT TO USE PELLETS THAT HAVE
BEEN FIRED OR ARE DEFORMED. DO NOT USE LEAD SHOT, DARTS,
STEEL BEARINGS, OR ANY OTHER OBJECTS BECAUSE THEY MAY
LODGE IN THE BARREL AND CAN CAUSE INJURY TO THE SHOOTER
OR SPECTATOR.
USE ONLY THE CALIBER PELLET DESIGNATED FOR YOUR AIR RIFLE.
CAUTION