Operator's Manual

4.0 Cocking and Loading

CAUTION

ALWAYS BE CERTAIN YOU ARE USING THE CORRECT SIZE (CALIBER) PELLET

FOR YOUR AIR PISTOL. REFER TO THE MARKINGS ON YOUR AIR PISTOL TO

CONFIRM THE CORRECT PELLET SIZE. NEVER REUSE AMMUNITION. BE

AWARE OF PINCH POINTS AND KEEP FINGERS OUT OF CLOSING LOCATION

BETWEEN SLIDE AND FRAME

NOTE: For best results use .177 cal (4.5mm) Flat Head

Match pellets under 8 grains in weight.

1. Pull back on hammer and hold to rear. Fig1.

2. Firmly grip slide and swing to fully open posion. Fig2/3.

3. Insert a single .177 caliber pellet into barrel. Fig 4.

4. Steadily press top of slide down to frame. Slide will lock back into place

Fig 5/6

5. Gun is now ready to re Fig 7.