User's Manual

SMAC3 User Material

b) Disassociated log: When an AP is disconnected with an SU or vice

versa due to a reboot/soft reset/ a manual disconnect then a log

is generated which is called a disassociated log. This log consists

of MAC Addresses and a reason for disconnection of the device.

For example:

Sat Apr 13 07:15:46 2019: Disassociated (MAC:

00:d0:41:e0:1c:1c) in SU/ Remote Device

Sat Apr 13 07:15:45 2019: Disassociated (MAC:

00:d0:41:e0:1c:04, Reason: Local Terminated) in AP or BSU

Reasons that are displayed in the log are:

Locally terminated: If an AP is a local device and loses SU link or

vice versa due to a reboot/soft reset/ a manual disconnect, then

the termination reason is said to be locally terminated.

Remote terminated: if an SU is unable to connect to an AP, due to

a reboot/soft reset/ a manual disconnect, then the termination

reason is said to be Remote terminated.

Power Off: (Remote Device): If there is a power failure either in a

AP or SU. The termination reason is said to be Poweroff.

c) Wireless Inactivity: This parameter is configured only in SU, if there

is no activity on wireless interface of SU in a specified time interval,

reset the wireless interface. The value should be configured in

minutes. An event log is generated when wireless inactivity

triggers and this is visible in wireless events log.

d) Link Inactivity: If there is no activity on Wireless link on SU in a

specified time, reset the wireless interface. The value should be

configured in minutes. An event log is generated when Link

inactivity triggers and this is visible in wireless events log.

e) DCS logs: