User's Manual

SMAC3 User Material

7.1.2 2.4 GHz Radio:

You can view the details of associated clients connected to the 2.4 GHz Radio

To view the 2.4 GHz Radio Statistics, click Monitor > Statistics > 2.4 GHz Radio

 MAC Address: Displays the MAC address of the client that is connected

to the AP

 IPv4-Address: Displays the IP address of the client

 RSSI (dB): RSSI stands for Received Signal Strength Indicator. For

receiving strong signal, the RSSI should be high. This section displays the

Receiver statistics. It indicates the power viewed across the receiver

input.

 Noise (dB): Refers to the noise level with which the AP received wireless

frames from the client

 Rx Rate (Mbps): Rx Rate of received wireless from the Client to AP

 TX Rate (Mbps): Tx rate of transmitted wireless from AP to Client