User's Manual

42
SMAC3 User Material
6.5 Upgrade/Reset
6.5.1 HTTP
• Backup & Restore
To configure Backup & Restore, Click Management > Upgrade/ Reset> HTTP >
Backup & Restore
 This back-up option allows user to either download the device configuration
locally
 The restore option allows user to restore the device configuration to the
uploaded configuration file.
 Restoring the config file to the device will take 30 sec approx.
 After uploading the configuration file, the device will load with the new
configuration
• Upgrade Firmware
To configure Upgrade Firmware, Click Management > Upgrade/ Reset > HTTP >
Upgrade Firmware
The firmware upgrade process happens in four phases:
 Upload: Select firmware to be uploaded
 Verification: Verify the firmware to validate the checksum
 Upgrade: Write the new firmware into flash memory
 Reboot: Once flash write processes is completed, and then automatically
reboot the device.
 The whole firmware upgrade process takes around 6.30 minutes to
complete.
 When upgrade process starts, all the existing links will be disconnected until
it reboots with new firmware.
 Due to the above fact, it is recommended to upgrade all remote devices
and then upgrade the local devices.