User's Manual

SMAC3 User Material

6.3 Location

To configure location, Click Management > System > System Configuration> location

This section consists of the basic profile information of customer’s device, such as Customer

name, Customer Location, Customer email, Customer Phone, Base Station ID and Link ID.

The major difference in AP and SU location parameters is that the SU have a Link Id which is

used to link to the AP.

6.4 Services

The device can be managed using different management protocols. The supported protocols

are HTTP, Telnet/SSH, SNMP.

To configure the Services, Click Management > Services

6.4.1 HTTP: Passwords setting or modification can be done in this section. Only Admin

has a privilege to change the passwords.

6.4.2 Telnet/ SSH: Enable Telnet/SSH and specify number of sessions. Here default is 2

sessions

6.4.3 SNMP: Enable SNMP

 SNMP version: SNMP v1, SNMPv1-v2

 SNMP Read Password: Here only Read password is available in order to read the

configuration from the SNMP.

 SNMP Trap Host IP Address: Here the IP address of a Trap Server is specified

 SNMP Trap Host Password: The password is set to secure the Trap sent.