User's Manual

40
SMAC3 User Material
ACK
When Dying Gasp is enabled in AP and a power failure happens in a SU. The SU
informs the wireless AP.
Once the AP receives Dying Gasp packet form SU, the AP sends acknowledgement
to SU. When the SU receive acknowledgement (ACK) from AP, it will stop sending
Dying Gasp packets to AP.
6.2 Logging
To configure logging, Click Management > System > System Configuration> logging
System log
System logs can be stored in external syslog server on PC
Log Server IP
Configure the PC IP Address on which syslog server is running
Log Server Port: The port on which the current log server is operating
Temperature log
Temperature Log feature is used to log the internal temperature of the device for the
configured temperature logging interval (By default, it is 30 minutes). For every 30 min, new
log is generated with temperature in °C.
To access this feature, navigate to Management >System> logging > Temperature and
configure the following parameters:
 Enable Temperature Log
 Temperature log interval (0- 60) minutes