User's Manual

SMAC3 User Material

Management

This chapter provides information on how to manage the device by using Web interface. It contains

information on the following:

6.1 System Configuration

To configure General, Click Management > System > System Configuration> General

6.1.1 General

NTP

This option allows user to enable or disable NTP feature. If enabled, user has to

configure the NTP server. The device will synchronize its local time with NTP server.

GPS

 This option allows user to enable and disable the GPS feature. GPS feature

will trigger the 1PPS pulses to retrieve the GPS information like latitude,

longitude, number of satellites and local time.

 The device will configure its local time if NTP is not enabled.

 The GPS information is also used for calculating the distance between AP

and SU.

Dying Gasp

This option allows user to enable or disable the Dying gasp feature. Dying Gasp

feature will trigger a TRAP in the event of power failure to inform the remote device

that it is shutting down due to power failure. The device can hold its power

maximum for 20ms to allow the TRAP to be sent out in either wireless or wired

interfaces.