User's Manual

33
SMAC3 User Material
The default status of NAT is disabled, so without special demand, please don't
select the enable option.
Wireless
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Gateway IP: 192.168.3.1
Ethernet
IP Address: 192.168.2.55
Subnet Mask: 255.255.255.0
5.2 Radius
To configure RADIUS, Click Network > RADIUS > RADIUS Configuration
The RADIUS server is a background process that serves the following functions:
 Remote Authentication Dial In User Service (RADIUS) is a client/server networking
protocol.
 It provides centralized Authentication, Authorization, and Accounting (AAA)
management for computers to connect and use a network service
 To authenticate users or devices before granting them access to a network
 Radius configuration is possible only in AP.
 A RADIUS server profile consists of a Primary and a Secondary Servers that can act
as Authentication servers.
Configure Primary and Secondary parameters
Primary Server: IP address of RADIUS server
Primary Server Port: The port number on which the RADIUS server is operating
Primary shared secret: An Authentication is required to connect the RADIUS Server to Client
If Primary Server fails, then secondary parameter configuration is used. Configuration of
Secondary Authentication Server is optional.