User's Manual

31
SMAC3 User Material
4.8 Security
The Wireless Security feature helps to configure security mechanisms between AP and SU.
To configure Security, Click Wireless> 2.4 GHz Radio Configuration > Security
Encryption Type: Select WPA2-PSK
Key: Select any desired key considering the note below.
None: If the encryption type is selected as none, then there exists any security to the data
frames transmitted over the wireless medium
Mobile App: Mobile App is used to configure the Access point remotely
Username: admin (1-32) characters
Password: XXXXXXXX (8-32)
characters
1. Special characters allowed for
configuration! @ ^ * - _ + : , . { } [ ]
4.9 MAC-ACL
To configure MAC ACL in AP, click Wireless> 2.4 GHz Radio Configuration> MAC ACL
This section has MAC status: Allow/ Deny/Disable and a MAC ACL table: MAC Address
Disable: By, default MAC ACL is disabled in AP (2.4 GHz) Configuration, i.e. all clients are
linked to AP
Allow: If Allow is selected, the MAC ACL feature allows only the authenticated clients to
access the wireless network of AP by adding their MAC addresses
Deny: If Deny is selected, only a particular
client is restricted.
The maximum number of clients that can
be added to the MAC ACL table is 32 MAC
ACL feature is applicable only in AP with 5
GHz / 2.4 GHz