User's Manual

24
SMAC3 User Material
 Once the Access Point parameters were configured, the subscriber unit will scan and get
parameters updated from the AP. This way SU’s basic configuration will be updated and
further need to be monitored.
 Once the System and Location Tabs are configured in both AP and SU.
 Go to SU web interface
 Quick Start> Site Survey tab> Join AP
 To verify whether the SU is linked to AP or not go to home button in the AP/SU and see the
Remote partners value 1 or 0. If 1, successfully linked.
3.6 Link Statistics
To configure Link Statistics, Click Quick Start> Link Statistics
 This is only for 5 GHz
 Wireless PTP and PTMP link parameters are summarized in this tab. click the edit symbol
below the details. You will be directed to another window with detail statistics where you
can find a disconnect option and conduct a link test.
Link Test:
Link test in AP:
Navigate to Quick Start>Link Statistics> edit symbol
Here the Link test can be between AP to SU (or) SU to AP either downlink or bi -directional,
also input the packet size and duration before starting the test. The results of various
parameters are displayed in the same screen.
Link test in SU:
Navigate to Quick Start>Link Statistics> edit symbolHere the Link test can be between SU to
AP (or) AP to SU either uplink or bi -directional, also input the packet size and duration
before starting the test. The results of various parameters are displayed in the same
screen.