User's Manual

21
SMAC3 User Material
Q-in-Q
To configure the VLAN Q-in-Q in SU, Click Quick Start> System
 This mode is well known for its double
tagging or stacking.
 The Q-in-Q mechanism allows Service
Providers to maintain customer
assigned VLANs while avoiding
interference with the Service providers
VLANs.
 Using the Q-in-Q mechanism, a SVLAN ID
is added to manage VLAN ID, such that
interference is avoided and traffic is
properly routed.
3.2 Location
To configure the Location, Click Quick Start> Location
This section consists of the basic profile information of customer’s device, such as Customer
name, Customer Location, Customer email, Customer Phone, Base Station ID and Link ID.
The major difference in AP
and SU location parameters
is that the SU have a Link Id
which is used to link to the
AP.
3.3 5 GHz Radio configuration
To configure the 5 GHz Radio configuration, Click Quick Start> 5 GHz Radio
Link Type
Link type is a mode of selecting a wireless connection between AP and SU radios. A Link
type here can be a PTP/ Backhaul/ PTMP. Few mandatory parameters are customized in AP
than in SU.