User's Manual

13
SMAC3 User Material
2.2 PC Configuration
Local PC IP Configuration
• Connect the Ethernet LAN cable to the Desktop/Laptop.
• Go to Control Panel> Network and Internet settings> Set up a new connection
• Configure the Desktop/Laptop with a static IP address of 192.168.1.1 and a subnet mask of
255.255.255.0
The Desktop/Laptop accessing the device must be in the same subnet as that of the device.
2.3 Device Access Types
The Device can be accessed in the following ways:
Access through Ethernet
 During initial setup, use a Wired Ethernet connection from the computer to the
device using a PoE.
Access through 2.4GHz Radio Interface
 After the basic network configuration, scan for wireless devices that are available on
the network, default SSID is SMAC3_Wi-Fi with a passphrase as sify@1234
 The device can also be accessed using Sify Network Mobile App or using any laptop
wireless connection.