User's Manual

SMAC User Manual
Sify Technologies Limited, 2011 © Copyright Protected Page 41
10.3 SNMP Settings
Click on the SNMP Settings link under the Management menu. This is a networking
management protocol used to monitor network-attached devices. SNMP allows messages
(called protocol data units) to be sent to various parts of a network. Upon receiving these
messages, SNMP-compatible devices (called agents) return data stored in their Management
Information Bases.
Enable/Disable
Select the Radio button to Enable or Disable SNMP function.
Contact
Specify the contact details of the device.
Location
Specify the location of the device.
Community Name(Read
only)
Specify the password for access the SNMP community for read only
access. By default its public; better keep it in default password.
Community
Name(Read/Write)
User cant able to change the default SNMP Read/Write password.
Trap Destination IP
Address
Specify the IP address that will receive the SNMP trap.
Trap Destination
Community Name
Specify the Destination Community name.
Save/Apply / Cancel
Press Save/Apply to apply the changes or Cancel to return previous
settings.
Press Save/Apply will change the setting immediately. It will not be able to undo the action.