User's Manual

SMAC User Manual
Sify Technologies Limited, 2011 © Copyright Protected Page 38
Enable/Disable
Select Enable or Disable function from the drop down list.
VLAN Mode
Select as Access for configuring in Access VLAN mode.
Management VLAN
Select the ID as one.
Access VLAN
Specify the access VLAN ID
Access IP Address
Specify the access IP Address
Access IP Mask
Specify the access IP MASK
Note
All the VLAN related changes will take effect immediately after
clicking on ‘accept’ tab.
10 Management Settings
Management section is on the navigation drop-down menu. You will then see seven options:
administration, management VLAN, SNMP settings, backup/restore settings, firmware upgrade,
time settings, and log. Each option is described below.
10.1 Administration
Click on the Administration link under the Management menu. This option allows you to
create a user name and password for the device. By default, this device is configured with a user
name and password admin. For security reasons it is highly recommended that you create a
new user name and password.