User's Manual

SMAC User Manual
Sify Technologies Limited, 2011 © Copyright Protected Page 10
Wi-Fi Protect Access
Wi-Fi Protect Access is a standard-based interoperable security
enhancement that increases the level of data protection and access
control for existing and future wireless LAN system.
1.2 Package Contents
Open the package carefully, and make sure that none of the items listed below are missing. Do
not discard the packing materials, in case of return; the unit must be shipped in its original
package.
 1* Wireless Access Point / Client Bridge (SMAC5800)
 1* Three Pin Indian type power cord
 1* PoE Injector 24V/1A Power Adapter (PA1022-3T3)
 1* Pole Mounting kit
 1* Earthing cable with AP only
Using other Power Adapter than the one included with SMAC5800 may cause damage of the
device.
1.3 System Requirement
The following conditions are the minimum system requirement.
 A computer with an Ethernet interface and operating under Windows XP, Vista, 7
or Linux.
 Internet Browser that supports HTTP and JavaScript.
1.4 Hardware Overview
Physical Interface
- 1 x LAN Port with PoE support
- 1 x RF port