User's Manual

SMAC User Manual
Sify Technologies Limited, 2011 © Copyright Protected Page 42
10.4 Backup/Restore Settings
Click on the Backup/Restore Setting link under the Management menu. This option is used to
save the current settings of the device in a file on your local disk or load settings on to the
device from a local disk. This feature is very handy for administrators who have several devices
that need to be configured with the same settings.
Save A Copy of Current
Settings
Click on Backup to save current configured settings.
Restore Saved Settings
from a File
SMAC5800 can restore a previous setting that has been saved. Click
on Browse to select the file and Restore.
Revert to Factory
Default Settings
Click on Factory Default button to reset all the settings to the
default values.
10.5 Firmware Upgrade
Click on the Firmware Upgrade link under the Management menu. This page is used to
upgrade the firmware of the device. Make sure that downloaded the appropriate firmware from
your vendor.
Upgrade process may take few minutes (approximate 3 minutes); please do not power off the
device and it may cause the device crashed or unusable. SMAC5800 will restart automatically
once the upgrade is completed.