User Manual

11
STEP 6: ELECTRICAL Connection
Plug cord from back of fryer into standard 120 Volt outlet grounded outlet. Fryer requires only 1 Amp of current.
OPERATION
LIGHTING
! CAUTION
IF YOU SMELL GAS DURING THE LIGHTING PROCEDURE, IMMEDIATELY SHUT OFF THE GAS
SUPPLY UNTIL THE LEAK HAS BEEN CORRECTED.
Open the burner compartment door and do the following:
1. Close Drain Valve completely. NOTE: There is an electrical interlock on the drain valve (DVI ) that prevents
the fryer from lighting unless the valve is fully closed
Drain Valve shown in CLOSED position
2. Turn POWER switch on CONTROL BOX located at bottom of cabinet to start point (Anti-clockwise).