User guide

Raven XE
32 20080616
Figure 5-4: Power Connector Diagram
Caution: Never apply voltage to the Digital inputs. The inputs can only be switched open
or closed to ground.
Monitoring the Input and Output
You can monitor the status of the digital inputs using ACEmanager, AT
Commands, or with special reports sent by email, SMS, or other report types
using Event Reporting. In ACEmanager, select the I/O group.
Figure 5-5: ACEmanager : I/O
Note: Please refer to the ALEOS User Guide for configuring Raven XE I/O in
ACEmanager.
VOHmin (IOH - 24 mA) 2.3V
VOLmax(IOL 24mA) 0.55V
Digital Input Digital Input/Output