User guide

Rev 2 Jan.13 43
3
3: Advanced Settings
This chapter provides information on how to change advanced
settings. The advanced settings enable you to configure various
aspects of the device such as Wi-Fi settings, WAN settings, router
settings, etc.
Hotspot software
Install driver for USB tethering
By default, a host driver is installed the first time you connect your
mobile hotspot to the computer via the USB cable. This driver
enables the mobile hotspot to connect to the Internet when it is
tethered to a USB port on the computer via the USB cable instead of
using the Wi-Fi network.
If you do not want to use this feature and want to use the USB cable
only to charge the mobile hotspot battery, you can set the host driver
not to install.
To set the host driver not to install:
1. On the Unite Manager homepage, log in as Administrator.
2. Click Settings > Device > Software and Reset.
3. In the Startup Options section, clear the checkbox beside Install
driver when connecting to Windows or MAC computers with a
USB cable.
4. Click Submit. (Submit button appears once you make a
selection.)