User guide

Sierra Wireless Mobile Hotspot User Guide
18 4112754
On the Unite Manager homepage:
The Unite Manager homepage shows the data usage for the current billing cycle
(for monthly plans) or for the pre-paid plan, and for the current broadband
session.
1. Log in as Administrator. The data usage information appears for the Billing
Cycle and for the current Session.
2. For pre-paid plans, if you want to add additional data to your plan, click Add
Data to connect to AT&T’s site, then follow the instructions to purchase more
data.
Manage Wi-Fi
The mobile hotspot gives you the option to share the Wi-Fi radio between two
Wi-Fi networks — a Main Wi-Fi network for devices you trust, and a Guest Wi-Fi
network that allows you to share your Wi-Fi with temporary visitors without
exposing them to your devices on the Main Wi-Fi network.
By default, Main Wi-Fi is enabled and Guest Wi-Fi is disabled. If your place of
business does not allow Wi-Fi, or for any other reason you want to disable Wi-Fi
and use the mobile hotspot only in tethered mode, the mobile hotspot gives you
that option.
Note: Whenever you make changes to Wi-Fi settings, the hotspot resets to activate the
new settings. Any devices connected to the hotspot will be disconnected when the hotspot
resets.
Add a wireless device to your Wi-Fi network
You can connect up to ten wireless devices such as smart phones, laptops,
tablets, digital cameras, printers, gaming consoles, and digital picture frames to
your mobile hotspot network. (See Set maximum number of connected devices
on page 22 for instructions on setting connections for Main Wi-Fi and Guest Wi-Fi
networks.)
You can add a wireless device to your Wi-Fi network manually, or if the device you
are adding is Wi-Fi Protected Setup (WPS) enabled, you can use the WPS
method to connect the device without using the Wi-Fi password.