Installation guide

1-4
VIDAR Film Digitizer Installation Guide
7. Install the exit tray...........................................................................40
8. Install the film damper assembly. ...................................................41
9. Install the entrance tray...................................................................43
10. Install the entrance tray film guide assembly. ............................... 44
11. Connect the power cord to the power supply................................ 45
Installing SCSI hardware..................................................................................46
1. Unpack the SCSI accessory box. ...................................................46
2. Install the SCSI card. ......................................................................48
Installing SCSI software ...................................................................................50
Apply power: digitizer first, then PC.....................................................51
Computers with Windows 2000 ...........................................................52
Computers with Windows 98 ...............................................................53
Computers with Windows 95 ...............................................................54
If the “New Hardware Found” window appears... ...........................54
If the “Update Device Driver” wizard appears.................................54
Computers with Windows NT 4.0 ........................................................ 55
Using the SCSI Utility .......................................................................... 56
Operating...........................................................................................................59
Apply power—then leave on continuously........................................... 59
About films and their orientation ..........................................................60
Loading a single film ............................................................................ 61
Loading multiple films ..........................................................................63
Troubleshooting................................................................................................65
Normal operation ................................................................................. 65
Power supply information .................................................................... 65
In case of difficulty ............................................................................... 66
Error conditions...............................................................................66
Operational problems......................................................................67
How to reset the digitizer ..................................................................... 71
RECOMMENDED RESET procedure.............................................71
ALTERNATE RESET procedure ....................................................72
Managing power .................................................................................. 73
Applying and removing power ........................................................73
Using power strips .......................................................................... 74