User manual

Xact Application User Manual
Xact Application User Manual Page 19
If sent directly to the device, the value is a hexadecimal ASCII number ranging
from 0000 to 210C.
Active Fences
This scrolling list indicates the geo-fences that are active. An active fence has its
corresponding checkbox checked.
If sent directly to the device, the value is a hexadecimal ASCII number ranging
from 0x00000000000000 to 0xFFFFFFFFFFFFFF, where a bit position
corresponds to a fence number. For example, to have fences 3 and 11 active, the
binary value would be 000000000000000000000000000000000000000100
00000100, which is 0x00000000000404.
Invisible Operation
Enable or disable invisible operation. Invisible operation prevents the device
from turning off when the power button is held; instead, the device appears to
power off but in fact does not.
Check the Enabled checkbox to enable invisible operation.
If sent directly to the device, the value is „Y‟ or „N‟.
Magnetic Sensor
Enable or disable magnetic sensor. A magnetic sensor could be used, for example,
to detect when the device has been removed from a holder or mount.
Check or uncheck the Enabled checkbox for the desired operation.
If sent directly to the device, the value is „Y‟ or „N‟.
Critical Confirmation
Set this to Off. If sent directly to the device, the value is the ASCII decimal
number 0.
Phone Number
The server phone number, without spaces, parentheses, dashes, or other
separators. This is the phone number or shortcode at which to receive SMS
messages.
If sent directly to the device, the value is expressed as 14 ASCII decimal digits
(bytes). Short numbers are padded with leading zeros to fill the 14 bytes.
Server IP Address
 IP address, in IPV4 dotted-quad format.