User manual

Xact Application User Manual
Xact Application User Manual Page 15
Bread Crumb Mode
Configuration
Editor
Direct to Device
0
1
2
3
4
5
6
7
bread crumb mode not active, no special case
bread crumb mode active, no special case
bread crumb mode not active, fence active start time = 0x5F
bread crumb mode not active, fence active stop time = 0x5F
bread crumb mode not active, fence active start, stop time = 0x5F
bread crumb mode active, fence active start time = 0x5F
bread crumb mode active, fence active stop time = 0x5F
bread crumb mode active, fence active start, stop time = 0x5F
System Mode
urrent mode. Values are: Walk Mode, Track Mode, Dog Park
Mode, Request Tracking Bundle, Request Tracking Bundle with Vibrate, and
Don‟t Update.
Leave this set to Don‟t Update.
If sent directly to the device, the value is a decimal ASCII number 
Number of Fences
Indicates how many geo-fences you have defined. Values range from 0 to 50, set
by the spinner.
If sent directly to the device, the value is a hexadecimal ASCII number from 0x00
to 0x32.
GPS Alert & AGPS OTA
Enable or disable an alert if GPS coverage is lost. This alert may be augmented
with Over-The-Air Assisted GPS (OTA AGPS).
If sent directly to the device, the value is a decimal ASCII number, as follows:
Value
GPS Alert
OTA AGPS
0
On
On
1
On
Off
2
Off
On
3
Off
Off
Note: with OTA AGPS enabled, more data is being sent across the network, which
may have cost implications depending on the data plan selected for your application.