Specifications
Introduction
Rev 8 Apr.14 Proprietary and Confidential - Contents subject to change 19
Accessories
The Universal Development Kit (UDK) is a hardware development platform for
AirPrime MC-series modules. It contains hardware components for evaluating
and developing with the module, including:
• Development board
• Cables
• Antennas (Additional antennas may be required to support all bands.)
• Initial allotment of support hours
• Other accessories
For instructions on setting up the UDK (part number 6000270), see [3] PCI
Express Mini Card Dev Kit Quick Start Guide (Doc# 2130705).
For over-the-air LTE testing, ensure that suitable antennas are used. (Two
antennas are required for this testing; Sierra Wireless offers an LTE-capable
antenna covering 700–2600 MHz BW—please order part number 6000492
(Qty 1—this contains two antennas).)
Required connectors
Table 1 - 3 describes the connectors used to integrate AirPrime MC-series
modules into your host device.
Ordering information
To order, contact the Sierra Wireless Sales Desk at +1 (604) 232-1488 between
8 AM and 5 PM Pacific Time.
Table 1-3: Required host-module connectors
1
1. Manufacturers/part numbers are for reference only and are subject to change. Choose
connectors that are appropriate for your own design.
Connector type Description
RF cables • Mate with Hirose U.FL connectors
(model U.FL #CL331-0471-0-10)
• Three connector jacks (Note: The UDK has two connector
jacks.)
EDGE (52-pin) • Industry-standard mating connector
• Some manufacturers include Tyco, Foxconn, Molex
• Example: UDK board uses Molex 67910-0001
SIM • Industry-standard connector. Type depends on how host
device exposes the SIM socket
• Example: UDK board uses ITT CCM03-3518