User manual

GHI Electronics,LLC Embedded Master User Manual
Getting Started with Embedded Master
9. Place a breakpoint at Debug.Print line. You can do this by clicking on the line and
then pressing F9.
10.Compile the application. There should be no errors.
11. Go to the menu and select “Project --> MyConsoleApp Properties...” and in the new
window select the “Micro Framework” tab. In the tab, there are options for
deployment. Select USB for transport and select EmbeddedMaster_EmbeddedMaster.
Rev. 2.06 TFT Page 42 of 102 www.ghielectronics.com