User manual

GHI Electronics,LLC Embedded Master User Manual
Embedded Master Products
2.2. CANxtra In-Box Development System
CANxtra exposes all the peripherals available on Embedded Master, many are available
on the DB25 connector. This is also a complete end product.
2.3. TFT Expansion and Touch Screen
This product includes 480x272 4.3" TFT Display from Sharp and the circuitry needed for
the display back-light. This circuit board is already included with Embedded Master
development system but it is offered separately for easy prototyping, especially when
using the breakout board.
EM-TFTEXP includes the base board, LQ043T1DG01 4.3" TFT display and 40-pin 0.5mm
FPC cable 050R40-102B.X3 connectors on TFT Expansion and Embedded Master Module
are connected using the 40-pin 0.5mm FPC cable 050R40-102B. Touch screen lines TP7
to TP10 are connected to ANALOG header (Pins 1 to 4) on the Development System
board.
Touch Connections
Analog Header
Pin #
LQ043T1DG01
Terminal #
Function
1 T1 YU - Y (12 o’clock side)
2 T2 XL - X (left side)
3 T3 YD - Y (6 o’clock side)
4 T4 XR - X (right side)
Rev. 2.06 TFT Page 18 of 102 www.ghielectronics.com