User manual
GHI Electronics,LLC Embedded Master User Manual
Introduction
● 10/100 Ethernet Interface
● Embedded USB host/device
● Graphics on SPI LCDs
● 51 GPIO Pins + 20 on LCD Connector (45 on Non-TFT)
● 31 Interrupt Inputs + 10 on LCD connector (30 on Non-TFT)
● 2 SPI (8/16bit)
● I2C
● 4 UART
● 2 CAN Channels
● 7 10-bit Analog Inputs (4 on Non-TFT)
● 10-bit Analog Output
● 4-bit SD Memory card interface
● 5 PWM with two separate clocks (2 on Non-TFT)
● 160 mA current consumption with everything enabled
● 40 mA Hibernate Mode
● -40ºC to +85ºC Operational
● RoHS Lead Free
● Connector-less Mounting
● Easy prototyping with even hand soldering
Rev. 2.06 TFT Page 11 of 102 www.ghielectronics.com