Integration Guide

Regulatory Compliance and Industry Certifications
Rev 1 Jul 17 17 41111211
1. The end product must use the RF trace design approved with the AirPrime
WP7603 module. The Gerber file of the trace design can be obtained from
Sierra Wireless upon request.
2. At least 20 cm separation distance between the antenna and the user’s body
must be maintained at all times.
3. To comply with FCC/IC regulations limiting both maximum RF output power
and human exposure to RF radiation, the maximum antenna gain including
cable loss in a mobile-only exposure condition must not exceed the limits
stipulated in Table 5-1 on page 17.
4. The AirPrime WP7603 module may transmit simultaneously with other collo-
cated radio transmitters within a host device, provided the following conditions
are met:
· Each collocated radio transmitter has been certified by FCC/IC for mobile
application.
· At least 20 cm separation distance between the antennas of the collocated
transmitters and the user’s body must be maintained at all times.
· The radiated power of a collocated transmitter must not exceed the EIRP
limit stipulated in Table 5-2.
Table 5-1: WP7603 Antenna Gain Specifications
Device Technology Band
Frequency
(MHz)
Maximum
antenna gain
(dBi)
AirPrime
WP7603
LTE 2 1850–1910 6
4 1710–1755 6
5 824–849 6
12 699–716 6
UMTS 2 1850–1910 6
4 1710–1755 6
5 824–849 6
Table 5-2: Collocated Radio Transmitter Specifications
Device Technology Frequency
(MHz)
EIRP Limit
(dBm)
Collocated
transmitters
a
a. Valid collocated transmitter combinations: WLAN+BT; WiMAX+BT.
(WLAN+WiMAX+BT is not permitted.)
WLAN 2400–2500 25
5150–5850 27
WiMAX 2300–2400 25
2500–2700 25
3300–3800 25
BT 2400–2500 15