User's Manual

62 Section 3C: Changing the Settings of Sprint PCS Connection Manager
The following table describes the options:
Menu Item Description
Always show
Welcome
Screens
Display a welcome screen upon a successful connection to the
Sprint Power Vision/Sprint PCS Vision network.
GO
automatically
when ready
Automatically connect to the Sprint PCS Network after
Sprint PCS Connection Manager starts, or whenever
Sprint PCS Connection Manager loses the network
connection.
Tip: You can also set Sprint PCS Connection Manager to start
automatically (see “Launch Connection Manager automatically” on
page 60). These settings provide an “always-on” connection, as long
as you have network coverage.
Automatic Attempt a Sprint Power Vision (1xEV-DO) connection and, if
not successful, attempt the slower Sprint PCS Vision (1X)
connection.
1xEV-DO
Only
Attempt only a Sprint Power Vision (1xEV-DO) connection.
Note: When in an area that has only Sprint PCS Vision (1X) coverage,
you won’t be able to connect to the network.
1X Only Attempt only a Sprint PCS Vision (1X) connection (even when
you are in Sprint Power Vision [1xEV-DO] coverage, which
provides faster data transmission speeds).
Note: When in an area that has only Sprint Power Vision (1xEV-DO)
coverage, you won’t be able to connect to the network.
Sprint Disable roaming when Sprint coverage is unavailable. You will
be able to connect only when Sprint coverage is available.
Automatic Allow roaming when Sprint coverage is unavailable.
Note: Roaming rates will apply. Roam Guard (page 44) can remind
you of this.
Roam Only Allow only roaming.
Note: Roaming rates will apply. Roam Guard (page 44) can remind
you of this.