User guide
Configuring AirLink GX Series devices
Rev 2 Jun.13 33
The AirVantage start page appears. You can now manage your device
through AirVantage.
Figure 3-2: AirVantage Start Page
Configuring with AT Commands
The device can be commanded and configured with AT commands. All the
commands are listed in the ALEOS Configuration User Guide.
In ACEmanager, mouse over a red AT to the left of a listing to see a popup
showing the AT command for that item.
Figure 3-3: Mouse over for AT command (Signal Strength Shown)
• Most AT commands are prefaced with AT. Exceptions are noted in the ALEOS
Configuration User Guide.
• The acceptable format and parameters are listed with each command in the
ALEOS Configuration User Guide.
• If you enter a recognized AT command, the device responds with “OK.” If the
command is wrong, the device responds with “ERROR” or “Unsupported.”