User guide

AirLink GX Series User Guide
10 4114008
Description
Front Panel
The front panel has the following indicators and controls:
Figure 1-1: GX Series Front Panel
•LEDs – These show the device’s operating status. Each LED can be red,
green, yellow or off. The LEDs are described in detail in LED Operation on
page 22. They are:
·Network – When green the device is connected to a cellular network with
an IP address assigned and a channel acquired
· Signal – When green it is receiving a cellular signal
· Activity – When green, the radio link is active
·Power – When green, the device is connected to power
• Reset Button – Pressing this button resets the device. All the LEDs turn solid
red after this button is pushed.
Note: Holding the button down for 10 seconds resets the device to its default settings.
Rear Panel
The rear panel has the following connectors and controls:
Figure 1-2: GX Series Rear Panel
LEDs
Reset Button
Antenna
Connector
Diversity/AUX
Antenna Connector
GPS Antenna
Connector
Power ConnectorUSB Port
Serial Port
Ethernet
Connector