User guide

Getting Started
Rev 1.1 Jan. 10 17
Anytimeyouusethemodemwiththesamecomputer,TRU‐
Installverifiesthatthecorrectsoftwareisalreadyinstalled.
Thisprocesstakesafewseconds.
Ifyouneedtore‐installthesoftware,seepage 27.
ForinformationonusingRogersConnectionManager,see
“Connectionmanagementsoftware”onpage 24orviewthe
OnlineHelpthatcomeswithRogersConnectionManager.
Mac OS X
1. Afterinsertingthemodem,double‐clicktheinstaller
package.
Ifyoudonotseetheinstallerpackage:
a. OpenFinder.
b. Under
Devices,clickRogers.
c. Doubleclicktheinstallerpackage.
2. Followtheon‐screeninstructions.
3. Restartyourcomputerwhenprompted.
Mac OS X 10.5 and higher:
1. Whenyourcomputerdetectsthemodem,themessage
ʺNewnetworkinterfaceshavebeendetectedʺapp ears.
2. Clickthe
Network Preferences...button.
3. IntheNetworkwindow,click
Apply.
4. ClicktheRogersConnectionManager
Connectbuttonto
connecttothenetwork.
Mac OS X 10.4.11:
1. Afteryourcomputerrestarts,goto
Applications > System
Preferences > Network
.TheNew Port Detectedpop‐up
windowopensontopofthenetworkwindow.
2. Click
OK.
3. ClickApplyandthenclosethewindow.
4. ClicktheRogersConnectionManager
Connectbuttonto
connecttothenetwork.