User guide

Sierra Wireless USB Modem User Guide
16 2131350
Windows Operating System
1
Iftheinstallationprocessdoesnotstartautomatically:
1. Double‐click
My Computer(WindowsXP)orComputer
(Windows7orWindowsVista)onyourdesktop.
2. Clickthe
TRU-Installdrive.
3. UndertheTRU‐Installdrive,gotothe
Winfolderand
double‐clickthe
Setup.exe file.
4. Followtheon‐screeninstructionsforinstallingthe
software.
Note: Do not remove the modem until the software installation is
complete. If you have inadvertently removed the modem too soon,
see “Reinstalling the software (Windows)” on page 27.
Connect to the network
Touseyouraccount(andconnecttoyourserviceprovider’s
network),youneedtohaveatleastoneprofilesetuponyour
modem.Dependingonhowyourmodemisconfigured,the
profilemayalreadybesetuporyoumayneedtocreateone.
Oncethesoftwareissuccessfully
installedandtheprofileisset
up,themodemisreadytouse.
1. If you are using a Mac computer, see page 17.
Scenario Required action
Rogers Connection Manager automatically detects
or creates a default profile.
Click Connect
a
.
Rogers Connection Manager prompts you to create
a data profile.
1. Click Yes, then....
• If Rogers Connection Manager opens the
Options window Profile pane and pre-selects
an appropriate profile (normally the name of
your service provider) from the drop-down
list...
a. Click OK to accept that profile (or choose
another from the drop-down list).
b. Click Connect
a
.
• If Rogers Connection Manager opens the
Options window Profile pane, the Profile
name field is blank, and your service
provider is not included in the drop-down
list...
You need to create a profile manually. Refer to the
Rogers Connection Manager online help for details.
a. The first time you insert the modem in the computer, it takes a few seconds for the modem to locate the net-
work. While it is scanning for a network, the Connect button is unavailable.