User guide

Getting Started
Rev 1.1 Jan. 10 15
Insert the modem into the
computer
Note: To ensure FCC RF
exposure limits, ensure that
there is at least 1 cm (0.4
inches) between you and the
modem. For more safety and
regulatory information, see
page 33.
1. GentlyinsertthemodemintotheUSBslot.
Note: If the modem does not
work in the first USB slot you
insert it into, try using a different
USB slot.
Note: If the orientation of your computer’s USB slot or the thickness
of your computer are such that pressure is applied to the end or side
of the modem, you may damage the modem or your computer. In
such cases, do not insert the modem directly into your computer’s
USB slot; use the USB extension cable and notebook computer clip
instead. See “Using the extension cable and clip” on page 23.
Note: Do not forcefully insert the
modem as you may damage
connector pins.
Note: Do not insert the modem or the USB extension cable into a
USB hub or, if your keyboard is separate from your notebook
computer, a USB slot on your keyboard.
Installing the software
ThemodemcomeswithTRU‐InstallaSierraWireless
featurethatinstallsthenecessarysoftwarethefirsttimeyou
insertthemodemintoyourcomputer.(Youdonotneedan
installationCD.)
Theinstallationprocessstartsautomaticallywhenyouinsert
themodem.Followtheon‐screeninstructionsforinstallingthe
software.
Note: If the modem does not launch Rogers Connection Manager or
the Install Software notice, try inserting it into a different USB slot.