Technical data

22 – English Installing the UMTS module in LIFEBOOK T731
Installing the UMTS module
To install the UMTS module, proceed as follows:
1
1
1
2
► Insert the UMTS module, contacts first, into the bay. Take care not to trap the antenna cables.
► Carefully push the UMTS module downwards.
► Pull the protective tubes carefully away from the antenna contacts.
► Secure the UMTS module with the enclosed screws.
!
Before connecting the antenna cables, you must first remove the protective tubes from the
cables.
!
To prevent damage to the antenna contacts, connect the antenna cables carefully to the
corresponding ports.
Ensure correct connection of the antenna cables:
● Connect the orange antenna (1) to the AUX port
● Connect the black or yellow antenna (2) to the MAIN port
► Fasten the two antenna cables.
► To fit the cover again, stow the cables carefully in the recess of the UMTS module bay, as
shown.
► Re-insert the cover and tighten the screws.
► Re-insert the ventilation slot cover. Ensure that it engages.
46 Fujitsu Technology Solutions