Technical data

Installing the UMTS module in LIFEBOOK P701 English - 7
Installing the UMTS module
To install the UMTS module, proceed as follows:
2
1
Insert the UMTS module, contacts first, into the bay. Take care not to trap the antenna cables.
Carefully push the UMTS module downwards.
Pull the protective tubes carefully away from the antenna contacts.
Secure the UMTS module with the enclosed screws.
!
Before connecting the antenna cables, you must first remove the protective tubes from the
cables.
!
To prevent damage to the antenna contacts, connect the antenna cables carefully to the
corresponding ports.
Ensure correct connection of the antenna cables:
Connect the orange antenna (2) to the AUX port
Connect the yellow antenna (1) to the MAIN port
Fasten the two antenna cables.
To fit the cover again, stow the cables carefully in the recess of the UMTS module bay, as
shown.
Place the cover over the bay and tighten the screws.
Fujitsu Technology Solutions 31